|
|
|
|
|
|
|
| MEAN WELL has launched another modified sine wave DC/AC inverter ~ A300-100 series ~ that extends the product coverage into lower wattage field. Along with the existing 150W~2500W product series, MEAN WELL can offer a complete modified sine wave inverter line to fulfill the low cost AC source demands. A300-100 can provide 100W continuously and possesses 150W/3 minutes and 200W surge power of peak load capability.
Using high-frequency circuit topology, A300-100 is light weight and possesses up to 90% of high efficiency. The cola can shape and fanless design make the installation much easier that can be put on the cup holder in the car and no need to concern about the ventilation issue. Through the built-in USB port output, all kinds of small consumer electronics (iPOD, cell phone, PDA….) can be powered or charged conveniently by A300-100 in the car. Protection for this unit is complete: internal fuse, battery low alarm, battery low shutdown, battery polarity, battery over voltage protections for input side, while short circuit, inverter overload, and over temperature protections for output side. The design of A300-100 series complies with global safety and EMC certificates and is suitable for powering many kinds of consumer electronics, home appliances, office & portable equipment, lighting equipment in vehicles, yachts, and mobile homes. Following are the features and main specifications and please visit our website for more detail information: A301/A302-100 |
l Output waveform: modified sine wave (square wave)
l Built-in USB output port (5Vdc/500mA)
l 200W surge power capability
l High efficiency up to 90%
l Dual color LED indicator
l Protection: Input – battery low alarm/shut down, over voltage, battery polarity
Output – short circuit, over load, over temperature
l Cooling by free air convection
l 100% full load burn in test
l Certificate: e-mark, CE, LVD
l Dimension: ψ65mm * 170mm (Diameter*L)
l Low cost, high reliability
l 1 year warranty |
| MEAN WELL has announced the introduction of 2W & 3W miniature regulated single output DC/DC converters – SPA02 / SPB03 series – for the growing demands of miniature size applications. With single-in-line packaging, these 2W /3W converters use identical plastic case (0.86” * 0.36” * 0.44”) which is less than 1/3 in volume compare to our existing 3W products ~ SCW03. Although with that small size, SPA02 & SPB03 can work at full load up to 70℃ of ambient temperature. Under 85℃of extreme high temperature, they can still provide 50% of output power.
SPA02 and SPB03 series are designed to comply with the standard pin assignment in the market that offers a better choice for users who has cost and space concerns. Standard features include 2:1 wide input range, 1000VDC input / output isolation, low ripple noise, low cost, CE / FCC compliance, and short circuit/overload protection. Besides, fully encapsulated packaging can help them withstand the influence of dust and moisture comes from all kinds of harsh environment. Suitable applications include industrial control, telecom/datacom, and distributed power architecture related installations. Following are the features of SPA02 and SPB03 series and please visit our web site for more detail information: SPA02, SPB03 |
l 2:1 wide input range (Optional 4:1 input range)
l 1000VDC I/O isolation (Optional 3000VDC I/O isolation)
l Single-in-line packaging
l Built-in remote ON / OFF control Cooling by free air convection
l Protection : Short circuit / Overload
l Low cost, high reliability
l Approvals : CE / FCC
l Dimension (L*W*H)：
21.8*9.2*11.1㎜ (0.86”*0.36”*0.44”) 2 years warranty
Ø 2W DC-DC regulated single output ~ SPA02
－ Input voltage: 4.5~9V / 9~18V / 18~36V / 36~72V
－ Output voltage : 5V / 12V / 15V
Ø 3W DC-DC regulated single output ~ SPB03
－ Input voltage: 4.5~9V/ 9~18V / 18~36V / 36~72V
－ Output voltage: 5V / 12V / 15V |
| In response to the high energy price, LED related application imbued with energy-saving concept is thriving nowadays. After launching constant voltage (C.V.) mode models like LPH-18, LPV-20/35/60 and constant current (C.C.) mode models like LPC-20/35/60, MEAN WELL introduced another new economical C.V. product series ~ LPL-18 ~ for the increasing demands of LED lighting, decorative lighting, and general high dust/moisture applications. With non-PFC design and 90~132VAC of input range, LPL-18 is an 18W AC/DC switcher targeting at economical lighting purposes. Fully encapsulated, the IP67 structure can protect the electronic components against from dust and moisture that makes them can be used at harsh locations.
Using heat-conducted glue and possesses high efficiency up to 84%, LPL-18 can operate between -25 ~ +70℃ by only free air convection and has the internal shock absorber to withstand vibration. Other standard functions / features include short circuit, over load, over voltage, and over temperature protections and wires style I/O (18AWG) for flexible installation. Typical applications include moving signs and backlighting, LED-based decorative/architectural lighting, LED stage and theater lighting, and LED electronic displays. Following are the features and main specifications and please visit our website for more detail information: LPL-18 |
|
|
Feature:
l Input range 90~132VAC only, suitable for using in USA, Canada, Japan, Taiwan…
l Plastic case and fully encapsulated, meet IP67
l Protections: Short circuit, overload, over-voltage, over temperature
|
l Suitable for LED lighting, sign board, decorative lighting
l Cooling by free air convection
l 100% full load burn-in test
l Comply with FCC/CE(LVD)
l Low cost, high reliability
l Dimension (L*W*H): 140*30*20mm
l 2 years warranty
| |
| |
| MEAN WELL launches the first model of our new slim DIN rail product series ~ SDR-240 ~ for the growing demand of high performance DIN rail power supply in the market. Featuring 93.5%+ of extreme high efficiency, it can provide 240W continuously or 360W for 3 seconds (with 50% more bonus power!!) up to 60℃ by only free air convection. With built-in active PFC function, SDR-240 is a full input range switcher that fulfills the requirement of EN61000-3-2 for harmonic current. The slim design of 63.5mm in width helps save the precious space on the rail and also makes it 42.8% smaller in size compare to its predecessor model. Other standard functions include DC OK relay contact, on panel LED indicator, and protection for short-circuit, overload, over voltage, and over temperature. To fulfill the requirements of marine and semi-conductor related usage, SDR-240 also complies with GL and SEMI F47 norms in addition to UL, CUL, TUV, and CE certificates. Suitable applications are factory automation, semi-conductor fabrication equipment, marine related installation, and electro-mechanical applications with mid power demand. Following are the features and main specifications of the SDR-240 series and please visit our website for more detail information: SDR-240 |
l 93.5% high efficiency
l 360W peak power ability for 3 seconds
l Built-in active PFC function compliance to EN61000-3-2
l Universal AC input 88~264V
l Protection: Short circuit, overload, over-voltage, over-temperature
l Cooling by free air convection
l Built-in constant current limiting circuit
l DC OK relay contact
l Can be installed on DIN rail TS-35/7.5 or 15
l Dimension: 63mm*125.2mm*113.5mm (W*H*D)
l Certificate: UL/CUL/TUV/CE/CB/GL/SEMI F47
l 3 years warranty |
| After lunching GS12(12W, wall-mounted type), GS18(18W, desktop & wall-mounted type), GS25(25W, desktop & wall-mounted type), and GS40/60(40/60W, desktop type) five series of green adaptors, MEAN WELL further expanded our AC/DC green adaptor line and introduced the GS90 series. The new generation of 90W adaptor comply with the latest Energy Star regulation (version 2.0), US California Energy Code (CEC level V), and EISA 2007 (Energy Independence and Security Act of 2007) of USA. Possessing very low “no load power consumption” (<0.5W) and up to 89% of high efficiency, the whole series are real energy-saving at both standby mode and active mode and fulfill the green trend of the world.
Using the standard IEC320-C14 inlet as the input connector, GS90 series are 90~264VAC full range input desktop switchers with built-in active PFC function. With earth ground pin and enclosed by UL 94V-0 rated plastic case, these Class I units can effectively prevent users from electrical shock. Through the built-in LED indicator, users and easily tell whether the unit is on duty or not. GS90 also passed the LPS (Limited Power Source) test and acquired global safety/EMC certificates per TUV, UL, CUL, CB, BSMI, CE, FCC, and CCC which greatly guarantee the safety and reliability for all different applications such as consumer electronics, communication industry, office/commercial equipment, and industrial devices. Please find the main features of GS90 series below and visit our web site for more detail product information: GS90 |
|
Features:
● Universal AC input / Full range
● Built-in active PFC function
● No load power consumption<0.5W
● Pass energy star level V(CEC)
● Comply with ESIA 2007
● 3 pole AC inlet IEC320-C14
● Class I power (with earth pin)
● Protections : Short circuit / Overload
Over voltage/ Over temp.
● Pass LPS
● LED indicator for power on
● Fully enclosed plastic case (UL 94V-0)
● 100% full load burn-in test
● Low cost, high reliability
● Approvals : TUV / UL / CUL / CB / BSMI / CCC / CE / FCC
● DC output: 12/15/18/24/48V
● Dimension: 145*60*32mm
● 2 years warranty | |
| MEAN WELL launched a peripheral unit ~RCP-MU~ for our rack power family to provide a more complete solution for the typical 19” rack operation environment. Possessing 1U low profile, RCP-MU is a monitoring and control unit for the RCP-1000 series rack power. It can decode the I2C signal sent by RCP series and display through digital meters or transfer into relay contact signals. Up to 3 units of RCP-1000 can be monitored by one RCP-MU and the information of output voltage, output current and internal temperature of each RCP-1000 unit will be shown on the digital meters. Using the potential meters and switches on the front panel of RCP-MU, output voltage of RCP-1000 can be trimmed and the RCP-1000 unit can also be turned ON/OFF remotely.
The built-in relays and LED signals can reflect the important operation status of each RCP-1000 such as AC fail, DC fail, and over temperature warning. To fulfill different installation requirement, the fixing accessory of RCP-MU is removable and hence increases it’s flexibility to all kinds of applications. Following are the features and main specifications of the RCP-MU and please visit our website for more detail information: RCP-MU |
|
l 1U low profile
l 19” rack mounting
l Control and monitor up to 3 RCP-1000 units
l Suitable for all kinds of RCP output (12V, 24V, 48V)
l Digital meters for output voltage, output current, and internal temperature on front panel
l Potential meter for adjusting output voltage of RCP-1000 unit on front panel
l Relay contact & LED indicator for AC Fail, DC Fail, and Over Temperature Warning,
l Removable fixing accessory
l Dimension (L*W*H): 440mm * 68mm * 44mm
l CE compliance
l 3 years warranty | |
| MEAN WELL has launched another high performance DC/AC power inverter - TS-700 series - after introducing TN/TS-1500 and TS-1000 series that extends the product coverage into lower wattage field. Using high-frequency circuit topology, this true sine wave inverter is light weight and possesses up to 91% of high efficiency. TS-700 can provide 700W continuously for all kinds of harsh load with low THD<3%. Peak load capability including 800W for 3 minutes, 1050W for 10 seconds, or 1400W surge power for 30 utility cycles.
TS-700 is controlled by microprocessor and the output AC voltage and frequency can be adjusted easily through its front panel. Besides, the “standby saving mode” function can also be selected by end users through the same setting button to save the precious energy stored in the battery banks. Protections for this unit is complete: internal fuse, battery low alarm, battery low shutdown, battery polarity, battery over voltage protections for input side, while short circuit, inverter overload, over temperature protections, and GFCI (optional – type F) for output side. The design of TS-700 series complies with global safety and EMC certificates and is suitable for powering all kinds of home appliances, power tools, and office & portable equipment in vehicles, yachts, mobile homes or places that the utility can’t be reached or the power quality is poor. Following are the features and main specifications and please visit our website for more detail information: TS-700 |
l True sine wave output (THD < 3%)
l Power ON/OFF switch & LED indicators for load / battery / operation status
l Protections: Input – Fuse, Bat. low alarm, Bat. low shutdown, Bat. polarity, Bat. over voltage Output – Short circuit, overload, over-temperature protection, GFCI (optional, F-type)
|
l High surge power up to 1400W
l High efficiency up to 91%
l Thermal controlled cooling fan
l Saving mode selectable by setting button
l 100% full load burn-in test
l Approval: E-mark, LVD(EN60950-1), CE, FCC
l Dimension: 343*184*70mm (L*W*H)
l 2 years warranty
| |
| After launching CLG-60/100/150, PLN-30/60/100, and ELN-30/60 product series, MEAN WELL introduced another new economical product family ~ LPH/LPV/LPC Series ~ for the increasing demands of LED lighting, decorative lighting, and general high dust/moisture applications. With non-PFC design, they are 18/20/35/60W AC/DC enclosed type switching power supplies targeting at economical lighting purposes. To fulfill different demands of system design, we provide both C.V. (constant voltage mode – LPV series) and C.C. (constant current mode – LPC series) models for users to choose from. Besides, the high IP structure can also protect the electronic components against from dust and moisture that makes them can be used at harsh locations.
Using heat-conducted glue and possesses high efficiency up to 86%, LP family can operate between -30 ~ +70℃ by only free air convection. To protect the unit from sudden high surge from unstable AC line, LP family can withstand 300VAC input surge for 5 seconds. Other standard functions / features include short circuit, over load, and over voltage protections and wires style I/O (16AWG or 18AWG). Typical applications include moving signs and backlighting, LED-based decorative/architectural lighting, LED stage and theater lighting, and LED electronic displays. Following are the features and main specifications and please visit our website for more detail information: LPH-18, LPV-20, LPC-20, LPV-35, LPC-35, LPV-60, LPC-60. |
|
● Universal AC input / Full range (LPH-18: 180~264VAC only)
● Withstand 300VAC input surge for 5 seconds
● Plastic case and fully encapsulated, meet IP66
● Protections: Short circuit, overload, over-voltage
● Cooling by free air convection
● Suitable for LED lighting, street lamp, sign board, decorative lighting…
● 2 years warranty | |
| After launching low wattage LED / outdoor power supplies from 20~96W, MEAN WELL debuted another new 150W high IP rated AC/DC product for the growing demands of larger scale LED lighting related applications. With wide range input 90~280VAC, the CLG-150 series also possesses active PFC function complying with EN61000-3-2 (harmonic current) class C for >50% of output rated loading that fulfills the requirement of typical lighting applications. The most important feature for CLG-150 is the user adjustable output voltage and current level. Keeping IP65/67 high protection level against dust and moisture, users still can adjust Io (and Vo) by removing the rubber stopper on the case (A, C type) or through the output signal cable (B type) which is often requested by LED system integrators.
Thanks to the leading edge ZCS/ZVS technology, the efficiency of CLG-150 are as high as 90% and hence can operate between -30 ~ +70℃ by only free air convection. Standard functions include short circuit, over load, over voltage, and over temperature protections. Three types of mechanical design (A, B, C type) can be chosen and users can select the most suitable I/O connection style (cable or terminal block) for their system design. Typical applications for these new high efficiency power units include general outdoor usage, LED streetlamp, mid-scale moving signs and backlighting, LED-based decorative/architectural lighting, LED stage and theater lighting, and LED electronic displays. Following are the features and main specifications and please visit our website for more detail information: CLG-150. |
l Universal AC input / Full range (up to 280VAC)
l Built-in active PFC function, comply with EN61000-3-2 (harmonic current) class C for >50% loading
l Protections: Short circuit, overload(constant current limiting), over-voltage, over temperature
l Cooling by free air convection
l Series models:
|
Model |
Stock |
IP Level |
I/O Connection |
Vo / Io Adjustment |
|
CLG-150-□A |
Standard |
65 |
Cable |
Vo/Io, through internal potential meter |
|
CLG-150-□B |
Optional |
67 |
Cable |
Io only, through output signal cable |
|
CLG-150-□C |
Optional |
N.A. |
Terminal Block |
Vo/Io, through internal potential meter |
l Suitable for general outdoor installations, LED lighting and moving sign applications
l Dimension (L*W*H): 222mm*68mm*39mm
l 3 years warranty |
| MEAN WELL has announced the introduction of 12W regulated single/dual output DC/DC converter – SCW12 / DCW12 series – for the growing demands of low cost and miniature size applications. With DIP packaging, these 12W products maintain the same size as original 3W products (1.25” * 0.8” * 0.48”) which increase the power density by 4 times and can still work at full load under 60℃ of ambient temperature. In this popular industrial form factor, right now MEAN WELL can offer 3W, 5W, 8W, and 12W products that provide multiple choices for space constraint applications.
SCW12 and DCW12 series are designed to comply with the standard pin assignment in the market. Other standard features include 2:1 wide input range, 1500VDC input / output isolation, remote ON/OFF control, low ripple noise, low cost, CE / FCC compliance, and short circuit/overload protection. Besides, the five-sided shield metal case can significantly enhance their EMC characteristics that make them suitable for industrial control, telecom/datacom, and distributed power architecture related applications. Following are the features of SCW12 and DCW12 series and please visit our web site for more detail information: SCW12, DCW12 |
|
Features:
● 2:1 wide input range
● 1500VDC I/O isolation
● Built in EMI filter
● Built in remote ON/OFF control
● Protection : Short circuit / Overload
● Cooling by free air convection
● Five-sided shield metal case
● 100% full load burn-in test
● Low cost, high reliability
● Approvals : CE / FCC
● Dimension: 1.25” * 0.8” * 0.48”
● 2 years warranty |
|
Ø DC-DC regulated single output ~ SCW12
Input: 9~18V / 18~36V / 36~72V
Output: 5V / 12V / 15V
Ø DC-DC regulated dual output ~ DCW12
Input: 9~18V / 18~36V / 36~72V
Output: ±5V / ±12V / ±15V
| |
| After lunching GS12(12W, wall-mounted type), GS18(18W, desktop & wall-mounted type), and GS25(25W, desktop & wall-mounted type) three series of green adaptors, MEAN WELL further expanded our AC/DC green adaptor line and introduced the miniature GS40(40W) & GS60(60W) series that comply with the latest Energy Star regulation and US California Energy Code (CEC level V). GS40 & 60 series are desktop external switchers possess the standard IEC320-C14 inlet as the input connector. With the same 125*50*31.5mm compact size made by UL 94V-0 rated plastic enclosure, GS40 & GS60 are light and convenient to carry and also fulfill the recovery rate of IT / communication equipment required by WEEE that around 92.1% of the unit can be effectively recovered! The whole design is imbued with energy saving and environmental protection concern and can match the design trend of end users’ future system.
Very low “no load power consumption” (<0.3W) and up to 92.5% of high efficiency are two main features for GS40 & GS60 to be energy saving. With 90~264VAC full range input and 5~48Vdc different output voltage options, they can be used globally for all kinds of small electronic devices. GS40/60 also passed the LPS test and acquired global safety/EMC certificates per TUV, UL, CUL, CB, BSMI, CE, FCC, and CCC which greatly secure all different applications for consumer electronics, communication industry, and industrial devices. Please find the main features of GS40/60 series below and visit our web site for more detail product information: GS40, GS60. |
|
Features:
● Universal AC input / Full range
● No load power consumption<0.3W
● Pass energy star level V(CEC) (12V and above)
● 3 pole AC inlet IEC320-C14
● Class I power (with earth pin)
● Protections : Short circuit / Overload
Over voltage/ Over temp.
● Pass LPS
● LED indicator for power on
● Fully enclosed plastic case (UL 94V-0)
● 100% full load burn-in test
● Low cost, high reliability
● Approvals : TUV / UL / CUL / CB / BSMI / CCC / CE / FCC
● DC output: 5/7.5/9/12/15/18/24/48V
● Dimension: 125*50*31.5mm
● 2 years warranty | |
| MEAN WELL introduced the new intelligent AC/DC battery charger PB-1000 series ~ 1000W charger for lead-acid batteries ~ that boost our charger product line up to 1000W. Featuring user selectable 2-stage / 8-stage charging characteristics, this intelligent charger controlled by microprocessor can quickly and efficiently feed your hungry batteries or using a more complete charging curve to store more energy into the battery banks. There are 2 battery banks can be connected to PB-1000 at the same time. The designed charging serial will switch the charging current between two battery banks automatically to ensure both banks are fully charged and maintain them at a suitable energy capacity level all the time.
To effectively extend the lifetime of batteries and reduce the maintenance efforts, PB-1000 also possesses a built-in temperature compensation circuit. Just connect the NTC sensor coming along with the charger unit to the body or ambient of the batteries, the output voltage of the charger will be adjusted accordingly based on the temperature. Featuring built-in active PFC function, PB-1000 can comply with the harmonic requirement per EN61000-3-2 which has been requested by more and more countries in the world. Other standard function / feature includes IEC320-C14 ~ 3 pole AC inlet, power ON/OFF switch with light indicator, remote ON/OFF control, fan ON/OFF control, reverse polarity, short circuit, over-voltage, and over temperature protections. Suitable application includes home appliance, solar power system, security system, UPS system, electrical wheelchair, leisure vehicle and vessel applications that may use lead-acid batteries as the power source or back-up system. Following are the features and main specifications and please visit our website for more detail information: PB-1000 |
l Microprocessor controlled power management
l 2 / 8 stages charging curve selectable on output panel
l Intelligent charger for lead acid batteries
l Universal AC input / Full range
l Built-in active PFC function, PF > 0.95
l Protections: Reverse polarity, short circuit, over-voltage, over temperature
l Built-in remote ON/OFF control and temperature compensation function
l Can be connected to 2 battery banks
l Cooling by built-in DC fan with fan ON/OFF control function
l 3 color LED loading indicator and relay contacts for status signals
l 3-poles AC inlet (IEC 320-C14)
l Dimension (W*H*D): 300mm*184mm*70mm
l Approvals: UL/CUL/TUV/CB/CE
l 3 years warranty |
| MEAN WELL has announced the introduction of new miniature DIN rail switching power supplies, MDR-100 series, for the fast growing demand of low wattage DIN rail applications. These Class I models (with F.G.) are enclosed with fully isolated plastic case to prevent users from hazardous shock. The design of universal AC input makes the worldwide installation more easily since users can get rid of bothersome input switch selection. Featuring active PFC function and up to 88% of efficiency, MDR-100 can be cooled by only free air convection up to 60℃. Another important feature of MDR-100 is its low no load power consumption (<1W). This unique characteristic in the market can significantly expand the application beyond just heavy industrial field, but can also be applied to datacom or IT applications with energy saving concern and to obey the anticipated government laws in the near future!
Short circuit protection, overload protection, over voltage protection, over temperature protection and the DC OK relay contact plus LED indicator for monitoring the status of PSU are standard functions for MDR-100 series. Typical applications include factory automation, process control, electro-mechanical industry, datacom, IT, and …etc.. Following are the features and main SPEC of the new MDR-100 series and please visit our website for more detail information: MDR-100 |
l Universal AC input / Full range
l Active PFC comply with EN61000-3-2
l Short circuit, overload, over-voltage, over temperature protection
l Cooling by free air convection
l Can be installed on DIN rail TS-35/7.5 or 15
l DC OK signal output (relay contact)
l No load power consumption <1W
l LED indicator for power on
l NEC Class 2 limited power source for 24V and 48V models
l Dimension (W*H*D): 55mm * 90mm * 100mm
l Certificate: TUV/CE/CB/UL/CUL
l 3 years warranty |
|
